Print Repeat Length Monitor
With one touch on the monitor screen, the operator can switch between three different see-at-a-glance display readouts: scrolling history, analog pointer or a giant numeric screen. Each screen also displays the speed at which the job is running. Discretionary warning alarms can be set to sound or appear if the repeat length goes out of your target range.
The DynaView II Print Repeat Length Monitor will pay for itself in just a short time with decreased waste and improved production schedules. You'll have significantly fewer reruns, reduced returned freight costs and improved customer relationships.
Easy To Use DynaView II Manual (3.5 MB)
The compact backlit LCD monitor installs at the operator station with the photo cell and pulse tachometer mounting at the web. There is no separate keyboard. The touch-screen monitor displays orange on a black background with reverse video available.
It is possible to store up to thirty different job setups at one time, making it easy to change jobs at any time. No lengthy training is required. All setup parameters are menu driven with several display choices available. Two levels of built-in password protection are also included.
Have you ever run 16 rolls, sent samples to the lab, and then found out the whole job was run out of spec? With the DynaView II, your production people will know right now, as the job is running, that correct repeat length parameters have been maintained - not after the job has run or been shipped to your customer.
DynaView II Specifications
| Maximum Web Speed | Special factory order for faster web: 2000 ft/min standard. |
| Minimum Repeat Length | Standard 3" at 2000 ft/min or contact factory. |
| Resolution | 0.02" divided by the averaging factor, i.e., if averaging 10 repeats, resolution is 0.002". |
| Chart Span | Set in recipe. |
| Screen Update Rate | Approximately 3 times per second. |
| Control Output | Pulse width modulated. Proportional to run length deviation from set point. |
| Control Output Gain | Set in recipe. |
| Binary Inputs: 2 | Acknowledge and silence alarm, eye dark on light. |
| Binary Outputs 2 | Warning and limit alarms. |
| Wheel Calibration Factor | Set in recipe. |
| Display Modes | 3 |
| Recipes | 30 |
Applications Experience / Web Tension Control Solutions
